eTensifier Electric Pump System

Revolutionary Portable High Pressure Electric Pump

High Pressure Electric Power
  • Up to 36,500 psi
  • Needs no air compressor, plugs into wall outlet
  • Portable, weighs only 46 lbs

3 Industry Leaders Combined Expertise
  • Designed for Global conditions
  • Lightweight, portable unit
  • Integral pressure transducer

Smooth/Quiet Hydraulic/Liquid Intensifier
  • Smoother flow rate from zero to full pressure
  • Electric motor quieter than air powered pumps

ProConnect Lower
  • It is possible to interchange pump lowers within the same pressure transducer range, 30 k psi
  • Users MUST make sure their entire pressure system is rated appropriately if changing the capability of pump, including, but not limited to, the burst disk and manifold

Now there's a high pressure hydraulic pump system that simply plugs into a wall outlet and doesn't require an air compressor. The eTensifier represents new technology introduced by three industry leaders… patent protected motors and controls from Graco, proven hydraulic pumps from Sprague and high pressure components and customer service from HiP.

The eTensifier will deliver pressures to 36,500 psi with a quiet electric motor, a smoother flow rate from zero to full pressure and controls that include an industry-first pressure test mode that allows you to set a defined pressure and walk away. In addition, the eTensifier features a new quick-connect system for exchanging pump lowers to facilitate routine maintenance without taking the whole pump out of commission.

Plug'n Play Electric Pump System

Smart Control
  • Pressure knob feature for standard jobs
  • Pressure test mode - set it and forget it
  • Cycle counter for routine maintenance planning

ProConnect
  • First-of-its-kind quick change Sprague pump lower
  • Install a spare lower to finish your job
  • No more downtime in the middle of a job


eTensifier Maximum Pressure Flow Rate at Pressure
Model psi bar in3/min lpm
46 4,600 315 59 0.9
60 6,000 420 53 0.8
87 8,750 605 45 0.7
100 10,000 685 39 0.6
125 12,500 860 32 0.5
160 16,000 1,100 26 0.4
237 23,750 1,635 18 0.3
365 36,500 2,515 12 0.2

eTensifier

Remote Control Unit

  • Tethered controller with 12-foot cord
  • Ideal for applications such as where the pump system is installed within a cabinet or small room, when the pump is used to test high pressure products and where hazardous materials are being pressurized
  • PN 25E250

For technical support on eTensifier, e710, and Sprague products, please contact: pumpsales@highpressure.com

(ID=226)
Location of 54.226.222.183: United States: US: LooKup no Session price: priceUSArray ( [userLocation] => US [userRegion] => North America )